Important: This article describes the default version of the report that every customer gets at the start. If the report was later customized for your company, its appearance and functionality may differ, including how some metrics are calculated.
The GPS dashboard is a Power BI report that uses GPS data to show whether the field force made their calls at the customer's location. For each employee and day, it shows how many calls had GPS data, how many were registered within the target distance from the call point, and how many lasted longer than the target duration. From the dashboard, you can open the employee's route on the map.
Where to find it
Power BI Reports → GPS Tracking → GPS
- On the Dashboard, click Power BI Reports.
2. Open the GPS Tracking report. Go to the GPS tab at the bottom of the report.
Note: You see the dashboard only if your role has access to Power BI reports.
At a glance
| Section | Description |
|---|---|
| Dashboard / Tab Name | GPS (GPS tab of the GPS Tracking report) |
| Business Goal | Show field force activity based on geolocation and evaluate the quality and compliance of customer calls using GPS tracking data. |
| Business Value | Helps management check that calls were made at the customer's location and within the expected time, makes call execution transparent, and helps quickly find suspicious or low-quality activity. Confirms that planned customer interactions really took place. |
| Main Users | Regional Managers, Sales Managers, Territory Supervisors |
| Key Decisions Supported | Control of actual presence during calls, finding calls registered far from the customer, checking call duration, checking employees' routes, supervising employees with irregular activity |
What's on the dashboard
Thresholds
At the top of the dashboard, set the thresholds that the cards and the table use to evaluate calls:
- Target Distance, m: the target distance in meters used to judge calls with GPS data. A call counts as made at the customer's location if the distance between the place where it was registered and the call point is below this value. It sets the threshold for the Distance cards and the Distance columns of the table. Nothing is counted until a value is selected. In the default report, 500 m is selected.
- Distance, m: shows only the calls whose recorded GPS distance, in meters, is inside the chosen range. Drag the handles or type the From and To values.
- Target Duration, min: the target call duration in minutes. It sets the threshold for the Duration cards and the Duration columns of the table. Nothing is counted until a value is selected. In the default report, 30 minutes is selected.
- Duration, min: shows only the calls whose duration is inside the chosen range. Call duration is the time in minutes from the call start to its actual closing. Drag the handles or type the From and To values.
Cards
The cards show the key metrics under the current filters. The colored bar above a card shows how the calls or employees split between green (meets the target) and red (does not meet it).
| Card | What the number shows | What the bar above shows |
|---|---|---|
| Visits | The number of completed calls (unique calls marked as finished) under the current filters. It is the base for the GPS and duration shares in the other cards. | No bar. |
| Visits with GPS | Completed calls that have a recorded GPS distance. | The share of completed calls with a recorded GPS distance (green) and without it (red), out of all completed calls. |
| Distance < [Target Distance] | Completed calls with GPS data whose recorded distance is below the target distance selected in Target Distance m. Empty until a target is selected. | Of completed calls with GPS data: the share with the distance below the target (green) and above it (red). Needs a value in Target Distance m. |
| Employees with distance | The number of employees who have at least one call with a recorded GPS distance above the target distance selected in Target Distance m. Empty until a target is selected. | Of employees with completed calls: the share with no call above the distance target (green) and with at least one call above it (red). |
| Duration < [Target Duration] | Completed calls shorter than the target duration selected in Target Duration min. Empty until a target is selected. | Of completed calls: the share shorter than the target duration (green) and longer than it (red). Needs a value in Target Duration min. |
| Employees with duration | The number of employees who have at least one completed call longer than the target duration selected in Target Duration min. Empty until a target is selected. | Of employees with completed calls: the share with no call longer than the duration target (green) and with at least one longer call (red). |
Table
The table shows calls by employee and date. Click ⊞ next to an employee to see the metrics by day, and ⊟ to collapse the list. The Total row at the bottom shows the totals for all employees. The report filters and the targets you select apply to the table.
| Column | Description |
|---|---|
| Employee | The employee's name; expand it to see the days. |
| Planned Visits | Calls planned for the employee in the selected period up to today. |
| Completed Visits | Calls the employee completed. |
| Completed Visits with GPS | Completed calls with a recorded GPS distance. |
| Completed Visits with GPS % | The share of completed calls that have GPS data. |
| Visits within Target Distance | Calls registered within the target distance from the call point. |
| Visits beyond Target Distance % | The share of calls registered farther from the call point than the target distance. Shown in red. |
| Visits shorter than Target Duration | Calls that lasted less than the target duration. |
| Visits longer than Target Duration % | The share of calls that lasted longer than the target duration. Shown in red. |
| Route Link | Click the link icon to open the employee's route on the map in Proxima Routes. See Route Link below. |
Note: When you change Target Distance m or Target Duration min, the cards and the table are recalculated right away. This way, you can check, for example, how many calls fit within 300 m instead of 500 m.
Report filters and buttons
The filters on the left narrow all visuals on the page. Most of them support multiple selections.
| Filter | Description |
|---|---|
| Period Filter | Quick period filter: All Periods, Current Year or Current Month. Shows only the calls dated in the chosen period. By default, the dashboard shows the current month. |
| Year | The calendar year of the call date. |
| Month | The month of the call date. |
| Day | The day of the month of the call date. |
| Direction | The direction the employee belongs to. Shows only the calls of employees from the selected directions. |
| Supervisor | Shows only the calls made by the employees of the selected supervisors. |
| Employee | Shows only the calls made by the selected employees. |
| Position | The employee's position. Shows only the calls made by employees in the selected positions. |
| Area | The area of the company where the call was made. Shows only the calls to companies in the selected areas. |
| Archive | The archive flag of the company where the call was made. Use it to show or hide calls to archived companies. |
| Country | The country of the company where the call was made. Shows only the calls to companies in the selected countries. |
| Visit Status | The call status as named in the CRM task state dictionary. Shows only the calls in the selected statuses. |
| Visit Type | The call type as named in the CRM task type dictionary. Shows only the calls of the selected types. |
| HCP Specialization | The specialization of the HCP the call was made to. Calls to institutions have no specialization. |
| HCP Target Group | The target group of the call, taken from the CRM target dictionary. |
| City | The settlement of the HCP or institution the call was made to. |
| HCP Category | The category of the institution or HCP the call was made to. |
- Info: opens the Proxima knowledge base in a new browser tab, where the user guides for the dashboards are published: descriptions of pages, filters and metrics.
- Notify Employee: opens the CRM messenger with the employees shown under the current filters as recipients, so you can send them a message about these results.
- Last update: the date and time of the latest data refresh.
Route Link
Click the link icon in the Route Link column to open the employee's route in Proxima Routes. The map opens for the employee and the day of the row you clicked. On the map, the blue line shows the employee's actual calls, and the green line shows the planned calls.
- Employee and period: at the top, select the employee and set the start and end date and time. Then click Show on map.
- Actual calls: turn the toggle on or off to show or hide the employee's actual calls (blue line) on the map. The number of stops is shown on the right.
- Planned calls: turn the toggle on or off to show or hide the employee's planned calls (green line) on the map. The number of stops is shown on the right.
- Calls: below the toggles, the list of days in the selected period with the total time for each day. Click a day to see its details.
Note: Keep both toggles on to compare where the employee actually went (blue) with where they were supposed to go (green). To see only one line, turn the other toggle off.
Tooltips
To see what a visual shows, hover the mouse over it, and then hover over the question mark icon (?) that appears above it. A tooltip with the description opens. The descriptions in this article are based on these tooltips.
Typical scenarios
- Check presence during calls. Sort the table by Visits beyond Target Distance % to find employees whose calls are often registered far from the customer. Expand the employee to see on which days it happened.
- Check the route. For a day with a high share of calls beyond the target distance, click the Route Link icon and compare the blue line of actual calls with the green line of planned calls on the map.
- Check call duration. Look at Visits longer than Target Duration % to find employees whose calls last unusually long.
- Check GPS data. Look at Completed Visits with GPS %. A low value means that many of the employee's calls have no GPS data, so presence during these calls can't be checked.
- Follow up with employees. Filter the dashboard to the employees in question and click Notify Employee to message them about the results.
Important: The dashboard shows only synchronized CRM data. If employees haven't synchronized their apps, their latest calls may not appear yet.